SBB main signal type L five-flame H0
*** Available from 01.10.2024 ***
SBB Type L main signal with five lights (item no. 432450) in H0 scale.
- finished product (handmade in Germany)
- Circuit board technology with integrated SMD LEDs (green, red, green, yellow, green) - uniform and true-to-color light image
- Sign and mast made of powder-coated cast brass - with delicate details such as the fine steps on the mast or the true-to-original electrical box. Thanks to the high-quality manufacturing, the signal including the paint is absolutely robust and scratch-free.
- SCHNEIDER plug-in foot system with USB C socket - install once and plug and unplug the signal as often as you like: for maintenance, cleaning, transport or replacement.
The wiring includes high-quality connection cables. The intended connection voltage for operation is 12 - 16 V.
This signal is part of our new products collection from 2024:
Completely technologically renewed. The precision remains the same.
You can also find a cheaper and somewhat simpler "retro" version in our shop.
DANGER:
- This product is not a toy!
- Not suitable for children under 14 years!
Collapsible row
PCB technology with SMD LEDs
Our modern LEDs produce a uniform and true-to-color light image. And when switched off, no colors are visible. Just like the original.
Our narrowest signals
The slim signal sign is also very attractive from behind. We route all cables into the ground inside the mast so they are barely visible.
Powder-coated cast brass
The signal mast with basket and the sign including sun visors and handles are cast from brass and then powder-coated. This creates a signal that feels great in the hand: shockproof, abrasion-resistant and durable.
For young and old - for a lifetime.
Precision down to the smallest detail
Filigree details such as the handles on the sign, fine steps on the mast or the true-to-original electrical box.
Plug-in foot system with USB C
An absolute innovation: Mount the socket once from above the system, plug and unplug the signal as often as required: for maintenance, cleaning, transport or replacement.
Installation is so easy:
1) Drill hole
Simply drill a hole with the Forstner drill and chamfer the top edge for easier assembly.
2) Install the socket
The socket is inserted from above, including the circuit board and connecting cable. If necessary, drive track nails through the four holes in the base.
3) Ballast
Cover the base with gravel so that it is no longer visible - this will make it as close to the original as possible.
4) Plug in the signal
Now you can clip the signal in and out as often as you like using the plug-in foot - without gluing, screwing or nailing.
Our SBB signals in H0: Made for your world.
Discover the entire product range:
Our SBB innovations for 2024.
Was Ihnen auch gefallen könnte:
Kein Bahnhof kommt mit nur einem Signal aus - auch nicht in der Schweiz ;)